Wurth WOW snooper diagnostic Interface WOW snooper Plus V5.008 WOW snooper bt Bluetooth setup guide
Wurth WOW snooper diagnostic Interface has released 2 version, one is non-bluetooth wurth wow diagnostic tool, the other is wurth wow bt diagnostic scanner. If you purchase bluetooth wurth wow bluetooth diagnostic interface, you need to setup bluetooth functions before using the wow! wurth snooper. Below OBD2Tuning.com sharing Wurth WOW snooper diagnostic Interface WOW snooper Plus V5.008 WOW snooper bt Bluetooth setup guide.
Bluetooth Wurth wow autocom cdp+ Delphi würth wow snooper+ V5.00.8 Wow Snooper VCI for cars and trucks
Wurth WOW snooper diagnostic Interface WOW snooper Plus V5.008 WOW snooper bt Bluetooth setup guide:
Step 1.Click the bluetooth icon in the bottom bar, it can be found near the computer clock. if the icon is not available it can be found under start bar – setting – control panel – bluetooth device.if a screen, like the one shown below appears(figure 1), please continue to step 2. if a screen like fugure 2 appears please continue to step 3.
Step 2Uninstall blue soleilwe need to un-install the blue soleil software in order to use the more secure microsoft windows bluetooth service. Click the start bar – settings – control panel – add/remove programs
When the new window appears with a list of programs in, please select blue soleil from the list then click remove.
Step 3.Windows bluetooth setupClick the bluetooth icon in the bottom bar, it can be found near the computer clock. if the icon is not available it be found under star bar – settings – control panel – bluetooth devices.
A new window will appearplease click ADD that is located on the bottom left of the window
please note: at this point your snooper bt should be plugged into a car and the power light should be on. the laptop/PC needs to be within range of the snooper BT.Clidk the small box next to “my device is set up and ready to be found”
Click next to begin searching for active bluetooth devices.
The search should find wow! snooper BT. Please click wow! snooper BT then click next.
It will then ask if you would like to use a passkey. please click on DON’T USE A PASS KEY. Click next.
It will then install drivers and configure settings, this can take up to a minute. Now you have finished pairing the snooper BT. Please click Finish.
Step 4Load wow! and log I using the supplied user name and codeword. once you have logged in, click on the green computer icon in the top bar in the middle of the WOW! shortcuts.
Scroll down the list on the left of the new window until you find ADP-BOX.Click the small circle with the cross in the middle to open this section.Click connections.Make sure the type of ADP box says D-Box snooper BT. Once you have done this click the FIND button.
There will be a new message window appear with configuration of diagnosis hardware. At this point, please ensure that the wow snooper bt connected to a car and the power light is on, also connect the USB cable from the laptop to the snooper BT box.Once you have done this, please click continue.
WOW! will then search and find the connected snooper BT. once it lists a COM port please click OK.
Next WOW! will request to search for the bluetooth function of the snooper box.to do this, please disconnect the USB cable from the snooper and laptop.once you have done this please click continue.
The search will find Snooper BT. Once it has found this please click OK.
You have now finished pairing and setting up connections between the snooper and laptop. You are now ready to start to diagnose!
This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2ECU chip tuning tool Center.
Step 2Uninstall blue soleilwe need to un-install the blue soleil software in order to use the more secure microsoft windows bluetooth service. Click the start bar – settings – control panel – add/remove programs
When the new window appears with a list of programs in, please select blue soleil from the list then click remove.
Step 3.Windows bluetooth setupClick the bluetooth icon in the bottom bar, it can be found near the computer clock. if the icon is not available it be found under star bar – settings – control panel – bluetooth devices.
A new window will appearplease click ADD that is located on the bottom left of the window
please note: at this point your snooper bt should be plugged into a car and the power light should be on. the laptop/PC needs to be within range of the snooper BT.Clidk the small box next to “my device is set up and ready to be found”
Click next to begin searching for active bluetooth devices.
The search should find wow! snooper BT. Please click wow! snooper BT then click next.
It will then ask if you would like to use a passkey. please click on DON’T USE A PASS KEY. Click next.
It will then install drivers and configure settings, this can take up to a minute. Now you have finished pairing the snooper BT. Please click Finish.
Step 4Load wow! and log I using the supplied user name and codeword. once you have logged in, click on the green computer icon in the top bar in the middle of the WOW! shortcuts.
Scroll down the list on the left of the new window until you find ADP-BOX.Click the small circle with the cross in the middle to open this section.Click connections.Make sure the type of ADP box says D-Box snooper BT. Once you have done this click the FIND button.
There will be a new message window appear with configuration of diagnosis hardware. At this point, please ensure that the wow snooper bt connected to a car and the power light is on, also connect the USB cable from the laptop to the snooper BT box.Once you have done this, please click continue.
WOW! will then search and find the connected snooper BT. once it lists a COM port please click OK.
Next WOW! will request to search for the bluetooth function of the snooper box.to do this, please disconnect the USB cable from the snooper and laptop.once you have done this please click continue.
The search will find Snooper BT. Once it has found this please click OK.
You have now finished pairing and setting up connections between the snooper and laptop. You are now ready to start to diagnose!
沒有留言:
張貼留言